BMW
This is a list of this manufacturers current finishing specifications for which there is a corresponding Delta MKS material.There may be other specifications for which we could offer a Delta MKS material as an alternative and the manufacturers older specifications may not be shown here.
We keep copies of many other specifications not listed here, please call us on 0121 602 1221 to find out if we have a coating to meet your requirements.
- select an issuer from the list.
| Specification | Surface | Base | passivation | Product | Coating thickness/weight |
Corrosion protection against | |
| white | red | ||||||
| GS 90010 | PHR | Znph + Öl | |||||
| ZNT | Zn | transparent | |||||
| ZNFE SW | ZnFe | appropriate passivation |
DELTACOLL® 80 black | ZnFe min. 5µm 0,5-2 µm SEALer |
240h | 480h | |
| ZNFE SW | ZnFe | Zn-phosphate | DELTACOLL® 80 GZ black (threaded parts ) |
ZnFe min. 5µm 0,5-2 µm SEALer |
120h | 480h | |
| ZNFE SI | ZnFe | ||||||
| ZNNIV SI | ZnNi | ||||||
| ZNS2 | Zincflake | DELTA-PROTEKT® KL100 | min. 8µm | 480h | |||
| ZNS3 | Zincflake | DELTA-PROTEKT® KL 100 + DELTA-PROTEKT® VH 301 GZ |
min. 8µm | 720h | |||
| ZNNID SW | ZnNi | appropriate passivation |
DELTACOLL® 80 black | ZnNi min. 6 µm; SEALer min. 6 µm |
10 cycles VDA; ISO 4541, or per request 720h SS |
||
| ZNNID SW | ZnNi | appropriate passivation |
DELTACOLL® 80 GZ black ( threaded parts ) |
ZnNi min. 6 µm; SEALer min. 6 µm |
10 cycles VDA; ISO 4541, or per request 720h SS |
||
| ZNNID SW | ZnNi | appropriate passivation |
DELTACOLL® 80 transparent | ZnNi min. 6 µm; SEALer min. 6 µm |
10 cycles VDA; ISO 4541, or per request 720h SS |
||
| ZNNID SW | ZnNi | appropriate passivation |
DELTACOLL® 80 GZ transparent ( threaded parts ) |
ZnNi min. 6 µm; SEALer min. 6 µm |
10 cycles VDA; ISO 4541, or per request 720h SS |
||
| N 600 00.0 | 10 / PHR | Znph | 1-4 µm | 6h (DIN 50021-SS) | |||
| 20 / ZNT | Zn ; ZnFe | transparent | min. 5µm | 8h in non-threaded areas | |||
| 30 / ZNFE | ZnFe | black chromate | min. 5µm | 48 h | 360h | ||
| 40 / ZNS | Zincflake | DELTA®-TONE 9000 | min. 5µm | 480h | |||
| 50 / ZNS SW | Zincflake | DELTA®-TONE 9000 + DELTA®-SEAL GZ black |
min. 10µm | 240h | |||
| 55 / ZNS SI | Zincflake | DELTA®-TONE 9000 + DELTA®-SEAL GZ silver |
min. 10µm | 360h | |||
This information is based on our current knowledge and our interpretation of the specifications.
No legal guarantee can be derived from our information. 06.06.2007/Rev.13
No legal guarantee can be derived from our information. 06.06.2007/Rev.13